If you have Orginal timberland boots, you know how easy it is to accidentally scratch them. While a quick fix like using a shoe polish will take care of the immediate damage, it won’t get the boots looking their best again. Luckily, there are a few steps you can take to get your boots looking their best again and prevent them from getting scratched in the first place.
Table of Contents
How To Fix Scratched Timberland Boots
If your boots are scratched or dented, you can fix them using a few simple steps. Sand the scratch away with a fine grit sandpaper, then use a wood filler to fill in the hole. Use a stiff brush to smooth and finish the filling. Repeat these steps if necessary. Once the boots are completely dry, apply a coat of sealant to protect them from further damage.
Steps to Fix a Scratched Boot
If you’ve got a boot that’s been scratched, there are several steps you can take to fix it. First, take a look at the scratch itself. Is it big enough to warrant a replacement?
If so, go ahead and replace the boot. However, if the scratch is small, you can try to fix it yourself. Here are four steps to fixing a scratched boot:
- Clean and Dry the Scratch: Make sure to clean and dry the scratch thoroughly with a cloth or a brush. This will help prevent future scratches from happening.
- Apply Armor Protectant: Next, apply armor protectant to the scratched area. Armor protectant is a type of rubbing compound that helps protect surfaces from wear and tear. Choose a protector that best matches your boots’ color and style. Apply the protectant using a cloth or your fingers.
- Mix Borax and WATER: Next, mix borax and water in a bowl or container until you have a smooth paste. Use this paste to cover the scratch area on your boots. Let the mixture dry for at least 30 minutes before wearing your boots again.
- Wear Your Scratched Boots Again: Finally, put
Materials You Will Need
If your Timberland boots have noticeable scratches on the surface, you can fix them yourself with a few simple supplies.
- Broom
- Tape measure
- Paint or shoe polish
- Sandpaper
- Rags
- Stiff brush
Preparation:
- Measure the length of the scratch from one end to the other. This will be your starting point.
- Tape the end of the broomstick to the tape measure so that it’s long enough to go across the scratch. Make sure that the bristles of the broomstick are facing down.
- Hold the broomstick parallel to the wood and sweep it forward and then backwards in a straight line. Make sure to start at one end of the scratch and sweep towards the other end. Continue sweeping until you reach the other side of the scratch.
- Remove the tape measure and broomstick and sand down both sides of the scratch using medium sandpaper. Be careful not to sand too deep or you will remove too much wood.
- Apply a thin layer of paint or shoe polish to one side of a rag
How to Fix a Scratched Boot Step-by-Step
If you’ve got a boot that’s been scratched up, there are a few easy steps you can take to fix it. First, remove all of the dirt and debris from the scratch. Next, use a lighter to heat up the boot until it’s soft. Finally, use a piece of cardboard or paper to apply pressure to the scratch while you fill it in with a hot iron.
Conclusion
If you’re like most people, you probably take your timberland boots for granted. After all, they’ve been by your side for years and they look great despite a few scratches here and there. Unfortunately, this isn’t always the case.
If your timberland boots are starting to show signs of wear and tear, it’s time to start thinking about fixing them up. Here are a few tips on how to fix scratched timberland boots without having to go through the hassle of taking them apart
How can I fix a scratched boot?
There are a few ways to fix a scratched boot. You can use a polish, a sealant, or a protector.
Polish: If the scratch is small, you can use a polish to try to fill in the scratch. This will help to restore the finish on the boot and make it look newer. Polishes are available at most hardware stores.
Sealant: If the scratch is bigger or deeper, you may need to use a sealant to protect the leather and prevent further damage. Sealants are available at most hardware stores and often come in a variety of colors to match your boots.
Protector: If the scratch is too big or deep for either polish or sealant, you may need to use a protector. Protectors are available in various types and are designed to keep the leather from drying out and cracking.
